 |
| Quantity: | |
|---|---|
Construction:
Conductor: Class 2 circular plain copper or aluminium of the type specified in AS/NZS 1125.
Conductor screen: Cross-linked extruded semi conductive screen.
Insulation: Cross-linked polyethylene compound XLPE in accordance with AS/NZS 3808.
Insulation screen: Cross-linked extruded semi conductive screen.
Water-blocking tape: Semi conductive water-swellable tape
Metallic screen: Plain annealed copper wires complying with AS/NZS 1125
Laying-up: Screened cores are laid up in a right-hand direction of lay.
Filler: Non-hygroscopic material
Binder tapes: Non-hygroscopic binder tape
Separation sheath: Polyvinyl chloride compound PVC 5V-90 complying with AS/NZS 3808
Armour: Single layer galvanized low-carbon(mild )steel wires helically applied
Inner sheath: Polyvinyl chloride compound PVC 5V-90 complying with AS/NZS 3808
Nylon Jacket: An extruded jacket of polyamide 11 or 12
Outer sheath: High density thermoplastic polyethylene ( HDPE)complying with AS/NZS3808
Technical data:
Rated voltage:1.9/3.3kV~19/33kV
Max conductor temperature(continuous operation): +90°C
Max conductor temperature(short-circuit for5sec): +250°C
Cable minimum installed bending radius: 20 x cable O D. after installation
（ O D. ：In multiples of diameter over the polyamide layer）
Standard
AS/NZS 1429.1
Construction:
Conductor: Class 2 circular plain copper or aluminium of the type specified in AS/NZS 1125.
Conductor screen: Cross-linked extruded semi conductive screen.
Insulation: Cross-linked polyethylene compound XLPE in accordance with AS/NZS 3808.
Insulation screen: Cross-linked extruded semi conductive screen.
Water-blocking tape: Semi conductive water-swellable tape
Metallic screen: Plain annealed copper wires complying with AS/NZS 1125
Laying-up: Screened cores are laid up in a right-hand direction of lay.
Filler: Non-hygroscopic material
Binder tapes: Non-hygroscopic binder tape
Separation sheath: Polyvinyl chloride compound PVC 5V-90 complying with AS/NZS 3808
Armour: Single layer galvanized low-carbon(mild )steel wires helically applied
Inner sheath: Polyvinyl chloride compound PVC 5V-90 complying with AS/NZS 3808
Nylon Jacket: An extruded jacket of polyamide 11 or 12
Outer sheath: High density thermoplastic polyethylene ( HDPE)complying with AS/NZS3808
Technical data:
Rated voltage:1.9/3.3kV~19/33kV
Max conductor temperature(continuous operation): +90°C
Max conductor temperature(short-circuit for5sec): +250°C
Cable minimum installed bending radius: 20 x cable O D. after installation
（ O D. ：In multiples of diameter over the polyamide layer）
Standard
AS/NZS 1429.1
